Search
Available Mon-Fri, 9am - 5pm
Fast UK Mainland delivery service
Real time delivery shown at checkout
Real time delivery shown at checkout
All stock products made by us in the UK
ISO 9001 Quality certified
Page 5 - Quick tips
- - July 24, 2025A 90-degree angle is called a right angle...
It is one of the most common and easily recognisable angles, forming an L shape. Right angles are used as a standard reference in design, construction and manufacturing because of their precise geometry. Many plastic profiles, including angle trims, are extruded with a fixed 90-degree shape to fit corners or edges cleanly. At MKM Extrusions, these are made from external grade PVC and are referred to as plastic angle trims, corner trims and corner joints. - - July 24, 2025Extrusion is a manufacturing process used to create long, continuous profiles which have a consistent cross-section. These include edging trims, channels, joining profiles and tubes...
During the extrusion process, raw materials are melted and pushed through a shaped die or tool. As the material exits the die, it takes on the die’s shape, it is then cooled and cut to length. The resulting plastic profiles are used across a wide range of sectors and industries. At MKM Extrusions, the extrusion process - - July 24, 2025Many thermoplastics can be extruded, including PVC, polyethylene, polystyrene and ABS. Different companies specialise in different materials...
Plastic is often used for the extrusion process, it softens when heated and solidifies when cooled. In the case of profile extrusion, raw materials are melted and pushed through a die or tool to form continuous lengths. Many different industries and sectors use plastic extrusions for a wide range of purposes, such as shopfitting, refurbishment, exhibition stands, - - July 24, 2025It depends on the type of extrusion process, but for rigid plastic extrusion PVC compound is usually used in pellet form...
At MKM Extrusions, the rigid stock range on our online shop is manufactured from an external grade of rigid PVC. The process starts with PVC granules, which are heated and pushed through a shaped die to form continuous profile lengths which are cut to size. This material is used to produce a range of rigid (and in some cases flexible) profiles, including plastic angle trims, plastic - - July 24, 2025Plastic extrusions are made by heating raw materials in pellet form and forcing them through a shaped die to form a continuous profile...
The profile extrusion process starts by feeding plastic granules into an extruder machine where it is heated until molten. The material is then pushed through a die that defines the shape of the profile. After exiting the die the profile is cooled and cut to length. At MKM Extrusions, this method is used to produce a wide range of PVC trims and profiles, including - - July 24, 2025
Plastic U channel is often used for edging, capping, sliding track, spcing or other purposes where a three-sided profile is needed.
Plastic channel profiles fits over the edge of a surface and they are often used with boards or panels. Common uses of plastic U channel include finishing edges, guiding sliding elements or acting as a protective cap. However, U channels are also used in many other ways, as applications can vary greatly depending on the industry or project. At MKM Extrusions, U channels... - - July 24, 2025
U channel is a three-sided profile usually with square corners, shaped like the letter “U”, and used to cap, guide or edge various materials.
It is an extruded profile with two parallel side walls and a base, designed to fit over the edge of a board, panel or similar object. U channels are commonly used for capping edges, creating sliding tracks or acting as trim. At MKM Extrusions, U channels are made from rigid PVC and are available in the colours black or white. They come in various different... - - July 24, 2025
U channels are often used for capping, sliding track, edge protection or other purposes where a channel-shaped profile is needed.
The three-sided shape of a U channel allows it to fit over the edge of materials such as boards or panels. It can serve functional or finishing purposes depending on the context. Common applications include panel edging, protective capping or acting as a guide for movement. At MKM Extrusions, U channels are manufactured from external grade rigid PVC and are available from... - - July 24, 2025Plastic strip is a flat, two-dimensional profile that is often used for edging, spacing, or covering surfaces such as boards and panels...
Also known as PVC flat bars or PVC strips, these profiles are versatile in use. They can serve as edge protectors, gap fillers, spacers, cover strips and many more applications. The profile has two dimensions in its cross-section (width and thickness) which makes it suitable for finishing flat surfaces with a clean edge. At MKM Extrusions, plastic strips are available - - July 24, 2025It depends on the application but plastic corner trims are sometimes attached using self-adhesive tape, glue, or mechanical fixings...
There are three main methods to consider when fixing plastic corner trim in place: 1. Self-Adhesive Tape Stock profiles are not supplied with adhesive tape. For larger custom production runs, it may be possible to apply double-sided tape during the manufacturing process. This allows for an invisible bond without visible fixings. The type of tape used depends on surface
