Page 8 - Quick tips

Plastic angle is a usually an L shaped profile 90-degree profile made from rigid PVC, which is often used to cover or finish edges and corners...
Plastic angles are extruded profiles usually with a fixed right-angle shape. They are available in many different sizes at MKM Extrusions, and are typically used in situations where an edge or corner needs to be covered or finished. Our plastic angles are made from external grade rigid PVC, which makes them suitable for both indoor and outdoor use. Stock

A fine-toothed saw is commonly used to cut plastic trim cleanly. The finer the teeth on the blade the better the cut will be.

When cutting plastic trim, it's important to use tools that provide clean, precise cuts to avoid jagged edges or cracking. A fine-toothed saw is often used for this purpose. This type of blade reduces the risk of chipping and ensures a smoother finish. For thinner trims, a fine-toothed handsaw could be an option. Always secure the trim firmly during cutting and proceed slowly...

A saw with a fine-toothed blade is often used for precise and clean cuts on plastic angle trim. The finer the teeth on the blade the better the cut will be.

When working with plastic angle trim, the goal is to achieve a precise cut without cracking or deforming the material. A miter saw provides stability and control, and it should have a fine-toothed blade to minimise the risk of chipping and giving a neat finish.

For smaller profiles, a fine-toothed handsaw or hacksaw could be used, but may require...

Using a miter box and a fine-toothed handsaw allows for accurate manual cuts on PVC angle trim.

Cutting PVC angle trim manually is sometimes an option for small projects or when power tools aren’t available. Start by placing the trim securely in a miter box, which helps guide the saw for precise angled cuts. Then use a fine-toothed handsaw to carefully cut through the material.

It’s important to apply steady pressure and saw slowly to prevent cracking or uneven edges. After cutting, lightly sand...

To cut plastic without cracking it, use a fine-toothed saw, apply slow and steady pressure, and support the material firmly.

Cracking often occurs when plastic is cut too quickly, with a dull blade, or without proper support. A fine-toothed saw helps reduce stress on the material during cutting.

Always secure the plastic trim firmly to prevent movement, which can lead to uneven cuts or stress fractures. Cut slowly and evenly, allowing the teeth to do the work. Avoid forcing the blade, as too much...

Use a fine-toothed saw to cut hard plastic trim cleanly and without damaging the material.

The plastic used in all our plastic angle trims is manufactured from an external grade rigid PVC, and the profiles require a controlled cutting approach. A miter saw with a fine-toothed blade is often used for this, as it delivers clean and accurate cuts without putting stress on the material.

If you don’t have access to power tools, a fine-toothed handsaw or hacksaw could be an option. Just be sure to secure...

PVC angle trim is made from rigid material, and over a long length it may flex slightly. It is not a soft material and cannot be coiled. Ideally you would need a sample of the material you are wanting to bend and then you can test the properties of that particular profile.

Plastic angle trims, such as those offered by MKM Extrusions, are manufactured from an external grade rigid PVC, so they are not soft and cannot be coiled. Using a heat gun to bend PVC trim is discouraged, as it softens the plastic...

A saw with fine teeth is often used when cutting thick plastic edging..

Thicker plastic profiles, including edging, require more robust tools to ensure a smooth and safe cut. A table saw or circular saw provides the stability and power needed to handle the extra material thickness. A fine-toothed saw blade reduces the risk of chipping or cracking. The finer the teeth the better the cut will be.

Before cutting, make sure the plastic trim is firmly secured, and guide the blade slowly through the material...

Use a fine-toothed saw cut PVC edge trim cleanly. If the teeth are as fine as possible it will give a better result. PVC edge trim typically refers to rigid plastic profiles like angle trims, flat strips, or plastic edging profiles. These are usually made from rigid PVC, which requires a precise and steady cutting method. Using a saw with fine teeth improves the end result, with cleaner cuts and reducing the risk of chipping.

It depends on if the edge trim is made from rigid or flexible material...